DTE-3114 Networked Quad QAM Modulator Power over Ethernet enabled

DekTec DTE-3114

DTE-3114 Features

  • Standalone four-channel QAM modulator with TS-over-IP (TSoIP) inputs and directly synthesized VHF/UHF outputs
  • Web and SNMP interface for setting parameters and observing status
  • Unit can be powered via the Ethernet cable (Power over Ethernet) or through a DC power supply jack
  • Supports IP de-encapsulation and 2D FEC decoding according to SMPTE 2022-1/2
  • Removal of IP jitter with programmable size of jitter-tolerance buffer
  • LCD status display shows device identifier, bitrate, IP/MAC address and status
  • Install up to 12 modules in 3U 19" rack using the DekTec rack-mountable rail, or units can be mounted on a DIN rail directly on a wall

DTE-3114 Applications

  • Small-scale CATV networks
  • Cable-network simulator
  • QAM test-signal generator

DTE-3114 Limitations

  • Channels must be grouped: overall spectrum of the DTE 3114 cannot be wider than 32Mhz
  • All channels must operate in the same mode and with the same symbol rate
  • Not supported:
     - Conditional access
     - SPTS-to-MPTS multiplexing
     - VBR input streams

Datasheets:

DTE-3114 white paper
DTE-3114 manual
DTC-300 StreamXpress white paper

Related Software