|
DVB-T/DVB-H Modulator + UHF Upconverter for PCI Bus 
Key Attributes | Modulation | EN 300 744 (DVB-T)
ARIB STD-B31 (ISDB-T) | | Bandwidth | 5 / 6 / 7 / 8 MHz | | Modulation | QPSK, 16/64 QAM | | Transmission Mode | 2k, 4k, 8k | | Convolutional Rate | 1/2, 2/3, 3/4, 5/6, 7/8 | | Guard Interval | 1/4, 1/8, 1/16, 1/32 | | RF Connector | 75-Ω F-Connector (2x) | | RF Frequency Range | 400 ... 862 MHz ±1 ppm | | RF Step Size | 100 kHz | | RF Signal to Noise (S/N) | 44 dB typ. @ 474 MHz | | Output Level | -29 ± 2 dBm | | Spurious Suppression | > 50 dB (d2: 20 dB) | | Noise floor | -102 dBm | | Phase Noise | < -85 dBc @ 10 kHz | | Return Loss | > 20 dB | | PCI rev 2.2 compliancy | 32 bit, 33/66 MHz
Universal 3V/ | Datasheets:  DTA-110T white paper DTC-300 StreamXpress white paper
Related Software DTA-110T Features - DVB-T modulator / DVB-H modulator fully supports EN 300 744
- ISDB-T and DTMB modulation options
- NEW: ATSC modulation option
- Low cost, low power and flexibility is achieved by performing part of the OFDM modulation process in software
- Integrated UHF Upconverter with on-board 400c862-MHz synthesiser
- RF output can be connected directly to a DVB-T terrestrial receiver
- Programming interface (DTAPI) compatible with other DekTec digital-video output adapters
- With DtLoop: DVB-T modulator replacement
- PCI rev 2.2, 32 bit, 33 or 66 MHz bus
|
Dektec Hardware 
